I have been told you cannot control any remote I/O using the Ethernet port on a MicroLogix 1100. Is this true?
Does anyone knows which components will I need to add at least 40 remote PNP (24vdc) inputs and 30 remote Relay outputs to this PLC and still being able to control all of them using the Ethernet IP protocol? Should I use a 1761-NET-ENI?
The distance between the PLC and the remote I/O is approximately 75 feet.
Thanks for all your answers.
Does anyone knows which components will I need to add at least 40 remote PNP (24vdc) inputs and 30 remote Relay outputs to this PLC and still being able to control all of them using the Ethernet IP protocol? Should I use a 1761-NET-ENI?
The distance between the PLC and the remote I/O is approximately 75 feet.
Thanks for all your answers.