InstrumentationUK
Member
Hi All,
I have National Instrument OPC Server and Citect scada as Client. The Problem is, when One Probe fails in the field then Citect Scada which is acting as Client goes down. All displays shows #DCOM.
When This promlem occured I checked OPC server with Matrikon Explorer, here every thing seems to fine.
I think I have to change some settings on Citect Scada's OPC driver, so that it can read tag values from OPC server all the time.
Any recommendations on how to change the settings on OPC driver in Citect scada.
Thanks in Advance.
I have National Instrument OPC Server and Citect scada as Client. The Problem is, when One Probe fails in the field then Citect Scada which is acting as Client goes down. All displays shows #DCOM.
When This promlem occured I checked OPC server with Matrikon Explorer, here every thing seems to fine.
I think I have to change some settings on Citect Scada's OPC driver, so that it can read tag values from OPC server all the time.
Any recommendations on how to change the settings on OPC driver in Citect scada.
Thanks in Advance.