micro logix 1400 and emerson servo epp

jimcav

Member
Join Date
Dec 2004
Location
new jersey
Posts
229
I want to connect my allen bradly micro logic 1400 to and emerson epp servo drive via the ethernet IP connection, has anyone done this? if so are there examples that i could follow to do this.

Thanks for the help

Jim Cav
 

Similar Topics

Hi! Last few I've been trying to send message from MicroLogix 1400 to Micro 850. Unfortunately every time I failed :banghead:. Did someone tried...
Replies
6
Views
3,143
I am trying to exchange data (N registers) to and from a Control Logix PLC. I am programming the messages in the Control Logix program, to...
Replies
7
Views
2,126
Does the 1100 only have 1 high speed counter, but it can have multiple inputs? And so then the 1400 has 6 HSC and you have a choice of multiple...
Replies
1
Views
1,710
Hey, I have an old panel that the plc has no display and flashing power and fault lights. I changed out the plc and now the new one powers up and...
Replies
4
Views
4,305
Hi, this is my first time using a PLC. Any assistance is greatly appreciated!!! I recently acquired a second-hand MicroLogix 1400 Series B...
Replies
2
Views
3,574
Back
Top Bottom