sparky64
Member
I'm using MSG Instructions to read / write 30 words of data between a PLC5/250 and an SLC5/04.
My MSG Instruction is scanned on condition of an OSR Instruction.
Can someone tell me, if the "MSG Instruction" is capable of transfering the required 30 words of data in 1 program scan.
Cheers
Sparky
My MSG Instruction is scanned on condition of an OSR Instruction.
Can someone tell me, if the "MSG Instruction" is capable of transfering the required 30 words of data in 1 program scan.
Cheers
Sparky