Saulo35
Member
Hi,
I have several Yaskawa V1000 VFDs connected via Serial Modbus to Opto22 serial modules. Everything is sort of working. I was able to set frequency references, start and stop motors, etc.
What I would like to do is to read VFD parameters. The manual "SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual", Appendix C, states parameters can be read and written, under C.6, "Observing Drive Operations". However I am unable to find how to request the value of a particular parameter.
Any help will be appreciated. Thank you
I have several Yaskawa V1000 VFDs connected via Serial Modbus to Opto22 serial modules. Everything is sort of working. I was able to set frequency references, start and stop motors, etc.
What I would like to do is to read VFD parameters. The manual "SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual", Appendix C, states parameters can be read and written, under C.6, "Observing Drive Operations". However I am unable to find how to request the value of a particular parameter.
Any help will be appreciated. Thank you