I have the cable (it has a convertor on it)
I have the manual (hard copy only)
I like beer (hint hint).
I'd like the software.
newmann can you please send me a copy of the software? [email protected]
--------------------------------------------------------------------------------
e=mc2 e=favour | m=amplitude of favour | c=beer | 2=an integer that by which the quality/quantity/homebrewness determines the frequency
I have client with obsolete Sprecher+schuh CPU20. I have the cable but not the software. We need to make small change to program. I need the software and the manual.
Hello all! Not sure if anyone would like assistance with the seater 290 plc and programming. I have a programmer and cable, as well as 5 years of experience with this specific plc. I have two of them and use them often to muck about with and one is a dust extractor controller. Please message me at 0448*700*946 or [email protected]
I have client with Sprecher+schuh CPU SESTEP 290. I need to make small change to program. How can I do? The serial is a normal RJ485? Does anyone can send me the programming software?
My email is [email protected]