we use M580 which have an Modbus RTU port correct if iam wrong now should i have to read input data from ab micrologix through read var block and what are the details i should get from the ab micrologix( ip, slave id , parity, baud rate). and can M580 read ab micrologix registers like I:0/0 or sholud i assign %M0.0 for the inputs i need to read from ab please help me in this case
communication between AB micrologix 1400 and modicon m580 through modbus rtu
- Thread starter ADHITYAN
- Start date
Similar Topics
Hi!
Last few I've been trying to send message from MicroLogix 1400 to Micro 850. Unfortunately every time I failed :banghead:. Did someone tried...
Hi there,
I am trying to communicate between Siemens 1214 that I have and a Micrologix 1400 on the other end through CIP protocol.
I downloaded...
can anyone help me to get IO Data from ab micrologix 1400 to modicon M580 they are connected through ethernet?ip communication
Hi everyone.
I'm using the relay CR30 for security.
I have programmed the relay to read inputs and use outputs, and that's easy. I want to know...
Hi all
I have micro logix 1200 and automation direct panel (EA9-T6CL). I have downloaded .RSS file in micrologix 1200 using 1761-CBL-PM02...