Micromaster 420 Serial PC Connection Problem

Jarryd

Member
Join Date
Apr 2019
Location
belgium
Posts
1
:oops:

Hello,



today tryed houres to connecting the micromaster 420 of my kaeser compressor to my laptop with the connection kit (MM4 Connection Kit) i bought of siemens.

first tryed with my laptop :

-installed V5.3 starter software

-setup com port usb to serial to "com1"

-setup in starter software “PC COM-Port (USS) to com 1 / baud 9600/...

cannot connect



*second attempt:

-installed on old laptop with serial port.... doesnt support xp

*third attempt (because i was thinking the serial to usb adaptor was the issue...)

-used desktop with serial port and win10

-installed V5.1 starter software

-setup serial port in windows to com1 /BR 9600/...

-Setup in starter software “PC COM-Port (USS) to com 1 / baud 9600/...

Nothing again no connection....

so after tried these steps above over and over i dont know what it can be if i use the com directly and setting like in manual...



settings in MM420 is did is

P700 =4

P2010.0= 6

P2010.1=6

p2011.0=0

p2011.1=0

P2012.0=2

p2012.1=2

P2013.0=127

p2013.1=127





Is there anything i forget to do for this setup?

please any advice what this can be?



thanks a lot
 

Similar Topics

Hello Everybody, Recently we changed the gearbox which has different ratio than the original one on a motor which is controlled by Micromaster...
Replies
3
Views
1,865
Hello All People, I am useing S7 300 plc and Micromaster 420 with Profibus(CB). the problem is that when i set frequency setpoint in plc through...
Replies
2
Views
1,670
Hi, I want to know how a simple micromaster 420 VFD without Communication board and other profibus modules,only attach profibus cable at its...
Replies
4
Views
1,609
I am experiencing an issue with the profibus modules on micromaster 420 drives. I would bet others are having the same problem so hopefully...
Replies
2
Views
4,026
I've been trying to find the max voltage rating of the 24VDC digital inputs on the Micromaster 420/440 drives from Siemens. I have found the...
Replies
2
Views
3,224
Back
Top Bottom