kali rajan
Member
Greetings to All,
In our project, we have SCADAPack 357 and it to be interface with GPS via Serial Communication RS 232. So I need to know how to interface with GPS or any other Serial Interface like Hyper terminal, Weighing Machine, etc...
Please share any documents for serial Interfacing with SCADAPack 357 RTU Controller.
We are looking to programming in the Isagraf 3.55, for the Serial Interfacing by hyper terminal via RS 232 by means of "rxstirng" & "txstring" function Block.
So please suggest how to use these blocks and how to interface with serial and how to transmit & Receive the Data's from & to Serial Communication...
Thanks,
Kali Rajan Manoharan,
[email protected]
+91 80156 4415
In our project, we have SCADAPack 357 and it to be interface with GPS via Serial Communication RS 232. So I need to know how to interface with GPS or any other Serial Interface like Hyper terminal, Weighing Machine, etc...
Please share any documents for serial Interfacing with SCADAPack 357 RTU Controller.
We are looking to programming in the Isagraf 3.55, for the Serial Interfacing by hyper terminal via RS 232 by means of "rxstirng" & "txstring" function Block.
So please suggest how to use these blocks and how to interface with serial and how to transmit & Receive the Data's from & to Serial Communication...
Thanks,
Kali Rajan Manoharan,
[email protected]
+91 80156 4415