Change time in WDT in PLC A2A Mitsubishi

Colt

Assuming you are using GX to program, go to PLC Parameters - RAS Settings and set the time there. If you are using Medoc!!!!! look under PLC Parameters.
 
Colt

Sorry! ant do it this way with this particular CPU. Try using WDT instruction.
 

Similar Topics

We had one go down. we have a new one. Their emergency Number don't work. The Model is TLSA046AAH-330N01-007 A catalog says we need software TET...
Replies
2
Views
136
“The HMI files we cannot open—they were saved in V13—we do not have that—I cannot restore file –please have them save in V11 and send them back to...
Replies
4
Views
135
Hi guys! I'm working in Studio 5000 and have a bunch of armorstarts there (+- 40). I need to set up parameters for each of them, mostly just same...
Replies
0
Views
75
Hello brothers We are contacting you because an error like [display change is currently controlled remotely] occurred while using the equipment we...
Replies
2
Views
173
Hi all. I'm trying to set up communication between a 1756-L72 (EN2TR) and a 1756-L82 (CPU port) using produced / consumed tags. From the L72...
Replies
13
Views
343
Back
Top Bottom