Akerstroms CU96 transceiver help

doomsword

Member
Join Date
Aug 2016
Location
Zagreb
Posts
201
So, I need to make radio control of some kind of hoist. Siemens S7-1517 PLC receives data from Akerstroms Mercury 300JD controller (over transceiver). Controller is connected over radio to CU96 (transceiver), which is what PLC sees on Profibus.


I cannot find any manual or information about this system, so I'm asking if anyone has it?

I need to see how buttons, joystick and lights are mapped to Profibus data exchange (16 bytes IN, 16 bytes OUT).
 

Similar Topics

My Master transciver 5908 and slave 5908 are set to one to mulipoint master and slave indivually. but sometimes both CD LED on master and slave...
Replies
0
Views
1,548
I want to meter run's data in Scadapack32 to Wireless Data Transceiver 5908. I use Telepace and RealFlo software in Scadapack32. Does anyone can...
Replies
1
Views
1,778
I bought a PLC 5/60 system off Ebay. It came with a 1785 ENET card as well as a Black Box transceiver. I've read here that the transceiver is...
Replies
3
Views
4,349
Back
Top Bottom