We have at least a dozen or so computers that use the Rockwell applications to talk to AB PLCs. We've noticed that a particular Microsoft Update https://support.microsoft.com/en-us/help/4093108/windows-7-update-kb4093108
Causes a sudden reboot on about 3 of the computers when booting up. This reboot does not generate a Windows dump file or even a bluescreen (even if it's set to block automatic reboots)
So we have to avoid that particular update even though it prompts to install. Has anyone else had issues with that update?
So far, the computers have the following in common
32Bit Windows 7
Has Rockwell software installed.
Here are the specifics of what 2 of the affected computers have installed.
PC #1 FactoryTalk Activation Manager 4.01.00
PC #1 FactoryTalk Diagnostics 2.90.00 (CPR 9 SR 9)
PC #1 FactoryTalk Services Platform 2.50 (CPR 9 SR 5)
PC #1 Redundancy Module Config Tool
PC #1 Rockwell Automation USBCIP Driver Package
PC #1 Rockwell Windows Firewall Configuration Utility 1.00.08
PC #1 RSLinx Classic 2.59.00 CPR 9 SR 5
Core2Duo with 4GB of RAM
PC #2 FactoryTalk Activation Manager 4.01.00
PC #2 FactoryTalk Diagnostics 2.90.00 (CPR 9 SR 9)
PC #2 FactoryTalk Services Platform 2.60.00 (CPR 9 SR 6)
PC #2 Rockwell Automation USBCIP Driver Package
PC #2 Rockwell Windows Firewall Configuration Utility 1.00.08
PC #2 RSLinx Classic 3.60.00 CPR 9 SR 6
PC #2 RSView32 7.60.00
Core I3 with 4GB of RAM
Causes a sudden reboot on about 3 of the computers when booting up. This reboot does not generate a Windows dump file or even a bluescreen (even if it's set to block automatic reboots)
So we have to avoid that particular update even though it prompts to install. Has anyone else had issues with that update?
So far, the computers have the following in common
32Bit Windows 7
Has Rockwell software installed.
Here are the specifics of what 2 of the affected computers have installed.
PC #1 FactoryTalk Activation Manager 4.01.00
PC #1 FactoryTalk Diagnostics 2.90.00 (CPR 9 SR 9)
PC #1 FactoryTalk Services Platform 2.50 (CPR 9 SR 5)
PC #1 Redundancy Module Config Tool
PC #1 Rockwell Automation USBCIP Driver Package
PC #1 Rockwell Windows Firewall Configuration Utility 1.00.08
PC #1 RSLinx Classic 2.59.00 CPR 9 SR 5
Core2Duo with 4GB of RAM
PC #2 FactoryTalk Activation Manager 4.01.00
PC #2 FactoryTalk Diagnostics 2.90.00 (CPR 9 SR 9)
PC #2 FactoryTalk Services Platform 2.60.00 (CPR 9 SR 6)
PC #2 Rockwell Automation USBCIP Driver Package
PC #2 Rockwell Windows Firewall Configuration Utility 1.00.08
PC #2 RSLinx Classic 3.60.00 CPR 9 SR 6
PC #2 RSView32 7.60.00
Core I3 with 4GB of RAM