Hi,
I have a wonderware system version 10.1 connecting to a control logix plc. I had communications established and i was able to communicate back and forth while in runtime mode, no problem at all.
When i started up yesterday, i was not able to communicate anymore.
I can download to my plc and and ping the ip address of the plc no problem at all.
In wonderware SMC, it is setup as New_Port_CIP_000, New_ENB_CLX_000, New_BACKPLANE_CLX_000, New_LOGIX5000_CLX_000, i have my ip address and device group set up in there for the access name in my application.
In the diagnostics section, under device groups, my device group "Thouet" is there but is doesnt say that any items are active.
If anyone has any ideas that i can look at or try that would be greatly appreciated.
Thanks.
Dennis
I have a wonderware system version 10.1 connecting to a control logix plc. I had communications established and i was able to communicate back and forth while in runtime mode, no problem at all.
When i started up yesterday, i was not able to communicate anymore.
I can download to my plc and and ping the ip address of the plc no problem at all.
In wonderware SMC, it is setup as New_Port_CIP_000, New_ENB_CLX_000, New_BACKPLANE_CLX_000, New_LOGIX5000_CLX_000, i have my ip address and device group set up in there for the access name in my application.
In the diagnostics section, under device groups, my device group "Thouet" is there but is doesnt say that any items are active.
If anyone has any ideas that i can look at or try that would be greatly appreciated.
Thanks.
Dennis