Beckhoff CX1020

deividasn · Apr 6, 2019

Hi i have BECKHOFF CX1020-0113 PLC, Can i programming them with TwinCat 3 ? or just with TwinCat 2 ?
tx

ivo.maenen · Apr 7, 2019

If you look at this page:

http://www.plccenter.cn/beckhoff/websitepage/english/embedded_pc/cx1020.htm

The controller is from around 2007, so I would say only TC2

this pages gives more info about your cpu and confirms what I wrote above:

https://www.beckhoff.com/english.asp?embedded_pc/embedded_pc_series_cx1020_cx1030.htm

deividasn · Apr 7, 2019

Tx for answer.

I Found answer maybe here?

Control software:
TwinCAT PLC run-time,
NC PTP run-time,
NC I run-time
but here is nothing about TwinCat2??

but if i looking for example CX5010 Control software for this PLC is
TwinCAT 2 runtime
TwinCAT 3 runtime (XAR)

i'm new in Beckhoff so is not easy understand

kolyur · Apr 8, 2019

They only list TC2, not 3, as an option to be preinstalled on the CX1020. I'm not sure what determines which versions are actually compatible, though. The CX5010 is a newer controller and can be ordered with either version of runtime.

LadderLogic · Apr 8, 2019

I think CX1020, being an older product with an older processor, supports only TwinCAT 2.

deividasn · Apr 8, 2019

tx for all

Beckhoff CX1020

deividasn

Member

ivo.maenen

Member

deividasn

Member

kolyur

Lifetime Supporting Member + Moderator

LadderLogic

Member

deividasn

Member

Similar Topics