(8{)} ( .)
Lifetime Supporting Member
Hello all,
I've got a system that had a 1768-L45S PLC that was upgraded today to a 5069-L330ERS2. Everything works fine except for the message reads from the other PLCs in the system. Those PLCs have no problem reading from this PLC.
The old message read path was: 2, 2, 2, 192.168.1.2,1,0. Using this path gives me an error code of 16#0009 and an extended error code of 16#0000_000c.
Any ideas?
Thanks in advance
(8{)} .)
(Yosi)
I've got a system that had a 1768-L45S PLC that was upgraded today to a 5069-L330ERS2. Everything works fine except for the message reads from the other PLCs in the system. Those PLCs have no problem reading from this PLC.
The old message read path was: 2, 2, 2, 192.168.1.2,1,0. Using this path gives me an error code of 16#0009 and an extended error code of 16#0000_000c.
Any ideas?
Thanks in advance
(8{)} .)
(Yosi)