LG PLC K120s and Vijeo Citect

pratyathedon

Member
P
Join Date
Dec 2011
Location
MH
Posts
1
Hello sir,
I am using Vijeo Citect SCADA v7.20 and LG Master k 120S PLC.
Can anyone please tell me the procedure on how to configure the PLC in Citect SCADA in Detail.What setting i have to do in SCADA.Thank you.
 
Vijoe Citect support LG K500 and K1000 series through serial via computer link module. You have to go to project editor> communication > express wizard and create/reuse IO Server, create new IO device and then select th driver and then enter the PLC noe address.
 

Similar Topics

K
modbus communication in PLC k120s
hallo,, my name is Bima, I'm a student & now I'm studying modbus communication in PLC. I use the master-k120s from LG. I learn from the manual...
2
Replies
17
Views
8,617
kurobima
K
B
k120s ls plc with smart i/o
I would be very thankful if you help me with my problem in k120s lg plc , We have k120s with Rnet communication module and 3 smart i/o with ( 16...
Replies
3
Views
3,926
Lancie1
Lancie1
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
26
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
8
Views
137
Mas01
Mas01
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
47
Alibaba07
A
Back
Top Bottom