how to read direct link tags in VBA?

briana banks

Member
Join Date
Jul 2005
Posts
242
Hi All

Using Rsview SE.

in my plc I've created 2 dim array (12X31) which is some form
of a calendar.

I want to write a small vba function that reads values
from a "start date" to a "stop date"

I know how to read HMI tags but I didnt create any.

How can i read directly from rslinx?

Thanks
 
Hi

well this will force me to make a display with 365 NumericDisplays
This is a little bit awkward solution
It takes almost 15 seconds to load such a display.

Is there another way?
 
Shouldn't take that long. Post your code if you can

I have found the 1756-EWEB much faster. 1000 tags in about 3 seconds
 

Similar Topics

Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
136
Hi Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer). In this I want to read a data from hmi to plc. The data was like...
Replies
0
Views
73
Hi everyone. Quick questions. On UnityPro, I want to open and quickly read tags from a .STA files witouth opening the program. I have 30 plc...
Replies
2
Views
102
Hi everyone, I am working on a project that needs to expose the SV (Set Value) of a temperature controller to a SCADA system. SCADA <-...
Replies
4
Views
134
Hello, So i managed to read the string coming from control logix and put a string display in PanelView 800. Now I am struggling to do the other...
Replies
1
Views
115
Back
Top Bottom