if1
Member
Hello all
I am having trouble getting a Mitsubishi FX1N to communicate with an E1012 HMI. I have a CAB19 cable plugged into the RS422 port on the PLC to the COM1 RS422 port on the HMI. When the HMI starts up I get, 'System Error, No PLC Port'.
Hopefully it's just a simple fix but I'm new to this game!
Thanks
Greg
I am having trouble getting a Mitsubishi FX1N to communicate with an E1012 HMI. I have a CAB19 cable plugged into the RS422 port on the PLC to the COM1 RS422 port on the HMI. When the HMI starts up I get, 'System Error, No PLC Port'.
Hopefully it's just a simple fix but I'm new to this game!
Thanks
Greg