rahilansari
Member
Hi All,
I am very new to Schneider Electric systems.
I am up-grading a stand alone quantum PLC 140CPU65160 system to a hot standby 140CPU67160 system. The existing system architecture was like CPU has an ethernet port communicating to Citect vijeo SCADA and NOE is communicating to a Modbus network reading/writing some data.
While up-grading the system we have 140CPU67160 which dosn't have an ethernet port and 1 x 140NOE77101. So my question is can I use the same NOE to communicate with the SCADA and Modbus network at the same time as in Siemens CP343-1 CP443-1 are able to perform same function simultaneously.
Thanks a lot for the support.
Regards
Rahil
I am very new to Schneider Electric systems.
I am up-grading a stand alone quantum PLC 140CPU65160 system to a hot standby 140CPU67160 system. The existing system architecture was like CPU has an ethernet port communicating to Citect vijeo SCADA and NOE is communicating to a Modbus network reading/writing some data.
While up-grading the system we have 140CPU67160 which dosn't have an ethernet port and 1 x 140NOE77101. So my question is can I use the same NOE to communicate with the SCADA and Modbus network at the same time as in Siemens CP343-1 CP443-1 are able to perform same function simultaneously.
Thanks a lot for the support.
Regards
Rahil
