mjp123gp
Member
I've got a customer with a printing machine that has an Omron C200H-CPU21-E and the processor is dead. I've got 120VAC but no status indicator lights, 24VDC output power, or anything else. I've found a few of these available on eBay so getting spare parts isn't really an issue, the problem is I haven't had much experience with Omron controllers. Hopefully someone can help me with a few questions I have below.
1) If I get the processor replaced, will I be able to swap the memory unit(C200H-MR831) to the new processor and the program load itself?
2) It looks like I'll need the cable USB-CQM1-CIF02. Is this correct?
3) What software is needed to work with this system? I've done a little research and from what i've found it looks like the CX-One software will work. I've got version 4.27.
4) Whats needed to get online and troubleshoot this processor? Is it similar to an Allen-Bradley or Siemens where I can connect and upload the program and make changes if needed or does it require me to have the source code before I can get online with it?
Thanks in Advance!
1) If I get the processor replaced, will I be able to swap the memory unit(C200H-MR831) to the new processor and the program load itself?
2) It looks like I'll need the cable USB-CQM1-CIF02. Is this correct?
3) What software is needed to work with this system? I've done a little research and from what i've found it looks like the CX-One software will work. I've got version 4.27.
4) Whats needed to get online and troubleshoot this processor? Is it similar to an Allen-Bradley or Siemens where I can connect and upload the program and make changes if needed or does it require me to have the source code before I can get online with it?
Thanks in Advance!