Finding PanelV+ model number from .mer file

technolog

Lifetime Supporting Member
Join Date
May 2015
Location
Ohio
Posts
315
We have a machine with a damaged PanelView Plus 600 on it. The machine has been moved to another location before we could get the details to enable us to purchase a replacement. Photographs tell me it has keys. I was wondering, is there any way of recovering the model number from the .mer file?
 
I don't think that based on mer file you can tell what type of PV it was running on.

But if you know it was PVP 600 then there is probably the case of what power supply it needs.
What environment it is working in.
What version of FTView was project created on.
Was it touch screen.

Knowing above you will probably be able to choose one. There is not so many of them after all.
 

Similar Topics

Hi all, I'm in the process of upgrading a PanelView1200 HMI program to be developed in FactroyTalk View Studio. The filetype for PanelView 1200...
Replies
7
Views
238
Hey all, pretty new to PLC and got a question regarding finding the MSB or the last non-zero bit in a SINT array in studio5000... I am reading...
Replies
2
Views
815
Having an issue connecting to my Micro820 PLC. I don't have an IP Explorer and I know its MAC Address is 5C:88:16:D8:E6:65. I'm connected to the...
Replies
5
Views
811
I have reached a dead end trying to find an EDS file. Manufacturer says to contact third party tech support. Clueless. RSLINX can see it, just...
Replies
9
Views
1,754
Hello, I have an array of 300 of UDT. In each UDT is an array of 3 DINT and another array of 3 REAL. I have 10 controllers that pull data from...
Replies
7
Views
1,132
Back
Top Bottom