exazier Member E Join Date Mar 2004 Location Kentucky Posts 4 Mar 18, 2004 #1 has anyone ever used a usb to rs-232 conveter for a mitsubishi series A1-sh plc i get a error of a connection speed not matching and is timing out
has anyone ever used a usb to rs-232 conveter for a mitsubishi series A1-sh plc i get a error of a connection speed not matching and is timing out
BTalbot Member B Join Date Jul 2002 Location New Jersey Posts 319 Mar 18, 2004 #2 Are you using usb to 232 to a SC09? (232/422 converter) also this link might help it covers alot of usb's to plc's not sure if A2sh is there but whatever works for an Fx shoild do. http://www.plctalk.net/qanda/showthread.php?s=&postid=46148#post46148
Are you using usb to 232 to a SC09? (232/422 converter) also this link might help it covers alot of usb's to plc's not sure if A2sh is there but whatever works for an Fx shoild do. http://www.plctalk.net/qanda/showthread.php?s=&postid=46148#post46148
exazier Member OP E Join Date Mar 2004 Location Kentucky Posts 4 Mar 18, 2004 #3 It worked the converter worked I had to switch the com port to one it would not communicate any another way thanks to my buddy BTalbot above thanks for leading me to the answer :site:
It worked the converter worked I had to switch the com port to one it would not communicate any another way thanks to my buddy BTalbot above thanks for leading me to the answer :site: