I know this topic has come up but I have a little different situation that the other guy. I have a frame with 2 pieces of sheet metal to hold boxes that stamped parts going to to be falling into. I have 2 boxes and a diverter in the center to allow for parts to go to different boxes. And my question is I need a scale to go inbetween the boxes and the sheet metal to weight and count the parts. This way when I get to a sertan weight and count the diverter will switch sides and I will be able to fill the second box while moving the first to our holding area without turning the machine off. So I was wondering if you have any scale recommendations that will do this and connect to a PLC.
Thank you
Thank you