1.6 to 2.8 VDC actuator feedback problems

Gyrus

Member
G
Join Date
Feb 2018
Location
Dammam
Posts
1
Hi All..

I have a fuel controller that only accepts 1.6 to 2.8 VDC feedback from the actuator. I need to replace that with a 4-20 mA or a 0-5 VDC feedback actuator.

Any Ideas on how I can accomplish this??

The fuel controller will not accept changes to its configuration.
 

Similar Topics

N
Here is an odd one ...0-24vdc control valve
I have been requested to test this proportioning valve for PLC control of flow/pressure. Dwyer Series SVP Proportioning Solenoid Valve The flow...
Replies
10
Views
406
NetNathan
N
N
24VDC Class 2 Power Supplies
We normally ground the -24VDC side of a control systems power supply. What are you folks thoughts about grounding the -24VDC side of a class 2...
Replies
1
Views
105
OkiePC
OkiePC
ZestyMozzarella
Siemens 1200 Micro - 0-10 VDC - Ratiotrol VEL/VEH 150
I have a conundrum with this current circuit. I have a Siemens 1215C AC/DC/Relay and an old drive - Ratiotrol (now Boston Gear company I...
Replies
7
Views
1,162
Puddle
P
jtn
Laptop outlet in a 24VDC panel
I have begun using 480VAC power supplies in my panels to keep heat from a transformer out of the panel. This works great if the panel is mounted...
2
Replies
17
Views
4,120
John Morris
J
B
Slip Rings for Thermocouples - Is using a RTD ( 10 vdc )better than using a Type J TC
Good Afternoon , It seems like we always have problems with using Type J Thermocouples with our slip rings . Would using a RTD at 10...
Replies
6
Views
1,633
Baker in Virginia
B
Back
Top Bottom