Panelview Standard 1200 I/O Mapping

plcengineer

Member
P
Join Date
Jan 2004
Location
USA
Posts
176
I have a panelview standard 1200 that is talking remote I/O to a plc5. I know that I have 4 btr's and 4btw's setup in the plc for communicating. I am wandering how I can tell where the panelview address goes. For example, This is a tag address in the Panelview..BI2/0/0 -1/7 BCD. How can I trace this address back through the plc.. I have BTR/BTW's setup for rack 0, module 0, group 0 and rack 0, module 1, group 0.. Also , I have rack 3, module 0, group 0 and rack 3, module 1, group 0..

How do I know what BTR/BTW would be linked to BI2/0/0-1/7?

Thanks,
 

Similar Topics

P
Panelview Standard RTC and firmware…
Had an interesting experience this morning. An old Panelview 600, 2711-K6C5X series B to be precise, comes up as error 32. Unfortunately it...
Replies
0
Views
204
plvlce
P
H
SLC5/03 to Panelview Plus 7 Standard
Good evening. I am in serious need of help. I am trying to connect a Panelview Plus 7 Standard to a SLC5/03(1741-L531) using a Moxa MGate...
Replies
3
Views
625
haldunkle
H
H
SLC 5/03 to Panelview Plus 7 Standard
Good evening. I am trying to get a SLC 5/03 connected to a Panelview Plus 7 Standard using a Moxa Mgate EIP3170 and I am not having much luck. I...
Replies
2
Views
513
haldunkle
H
K
Adding Duplicate Standard PanelView (not Plus) to SLC 5/04 PLC over DH485
Hello, We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Replies
1
Views
664
Ken Roach
Ken Roach
B
Panelview 600 Standard to L81E
Hello All. I have an interesting one for you. I have a brand new Panelview 600 Standard 2711-K6C20 and I'd like to get it to talk to an L81E...
Replies
7
Views
2,003
bob12
B
Back
Top Bottom