cockrell960
Member
Hello,
I am having an issue and don't even know if its possible to create a selectable box that a user can click on and change what the text reads. We have a emergency response trailer that has a plc talking to a g310s210 redlion and need to be able to change the text of the h2s monitor locations in the redlion based on location of the emergency. These h2s monitors are not stationary and talk to the plc through a wireless radios and will change position based on emergency location. It is fairly important that during an emergency personnel know where the h2s monitors are in case one goes off. Any help would be greatly appreciated.
thank You
I am having an issue and don't even know if its possible to create a selectable box that a user can click on and change what the text reads. We have a emergency response trailer that has a plc talking to a g310s210 redlion and need to be able to change the text of the h2s monitor locations in the redlion based on location of the emergency. These h2s monitors are not stationary and talk to the plc through a wireless radios and will change position based on emergency location. It is fairly important that during an emergency personnel know where the h2s monitors are in case one goes off. Any help would be greatly appreciated.
thank You