Remote I/O in Softlogix

jomm

Member
J
Join Date
May 2010
Location
Makati
Posts
1
I just want try to communicate a Remote I/O to Softlogix. I already add and configure Ethernet communication module for Softlogix. I also clear the "accept UDP messages on ethernet port" in RSLinx. Still i got a communication timeout in ENBT module configured in the network.
Softlogix connection to ENBT.jpg
 

Similar Topics

Cotafam
Addressing a Remote I/O Bit
See the screenshot of EIP tag list. We are trying to read in a digital input that is hard-wired. It is shown here as I31.1. I believe we cannot...
Replies
7
Views
269
Cotafam
Cotafam
T
Problem with remote control Compactlogic 35e
Hello Dear users, I am writing about a problem that has been bothering me for a few days, i.e. I am trying to establish remote access to the Allen...
Replies
0
Views
75
TOREK513
T
T
Red Lion CR3000, Remote reboot possible?
Hello All, I need the ability to remotely reboot a Red Lion CR3000 HMI. Due to some graphics issues when the database is updated the HMI must be...
Replies
4
Views
204
TopperAce
T
BobB
Remote access and control
I have to provide remote access and control to a touch screen. I was thinking about using Weintek and the Weincloud. Does anyone know if this is...
Replies
11
Views
588
atc222
A
O
Remote Connection to ABB MOD300 OPC Server - Difficult or Impossible
Folks, I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Replies
1
Views
157
odwyerpw
O
Back
Top Bottom