Bateman87
Member
Hello all. I am having one heck of a time and am hoping someone can point me in the correct direction.
I have a HoneyWell 1900G-HD2 barcode scanner that is currently connected to a Micrlogix 1400 via the Channel 2 Ascii. When I pull the trigger on the scanner, I am not getting any information back at the PLC. I am not seeing an error code or DN on the ARL instruction.
I am not sure what to try since I have never done anything with a Barcode on a Micrologix before.
If there is a way to post a photo or something of the program, please let me know so that I can show you how my boss set up the program.
Thank you.
I have a HoneyWell 1900G-HD2 barcode scanner that is currently connected to a Micrlogix 1400 via the Channel 2 Ascii. When I pull the trigger on the scanner, I am not getting any information back at the PLC. I am not seeing an error code or DN on the ARL instruction.
I am not sure what to try since I have never done anything with a Barcode on a Micrologix before.
If there is a way to post a photo or something of the program, please let me know so that I can show you how my boss set up the program.
Thank you.