DzakwanAfif
Member
Hello, I just need some help here...
I integrate my PLC and HMI through the KepserverEX (OPC). When I check at the OPC quick client, I see that the flow through the pipe is 2.6 m3/Hr.
But when I check at the HMI, it just sends me 3 m3/hr (the intouch make my value increment to 3 m3/hr).
Does anyone know how to fix this? So the value in the Intouch HMI is the same as in my OPC Quick Client.
For another information, the tags I declare is already at IO Real type.
Thank you so much
I integrate my PLC and HMI through the KepserverEX (OPC). When I check at the OPC quick client, I see that the flow through the pipe is 2.6 m3/Hr.
But when I check at the HMI, it just sends me 3 m3/hr (the intouch make my value increment to 3 m3/hr).
Does anyone know how to fix this? So the value in the Intouch HMI is the same as in my OPC Quick Client.
For another information, the tags I declare is already at IO Real type.
Thank you so much