Hi every one , I'm working on an experience to get data from elektronikon .
I'm using atlas copco's combox-P and a CPU s7-400 ,so i've connected the combox to the CPU via Profibus network,also via CAN to the elektronikon.
the configuration is okay and the combox is shown and well connected as a slave in the HW.
the problem is when i demand an information with a simple code of reading, all i get is a ''NODE ADDRESS NOT FOUND" erreur.
I tried so many times with a simple move function to the Combox-P's inputs/outputs,also with a SFC14 and 15. but i get the same erreur avery time, knowing that the LEDs on the combox are on ( 3on, 4on ,5on ,6 on/off).
Please if any one can help me with this i'm so looking for solutions .
regards