ab rio

plc noob

Member
Join Date
Oct 2007
Location
atlanta , georgia
Posts
258
guy's

when using ab rio . what is the physical layer of rio / blue hose ? i belive the protocol is a closed ab protocol correct ? i can not seem to find anything that describes the physical layer . LIKE AB DFI is a 232 physical layer . any info at all on rio i would be grateful to get

thanks everyone
 

Similar Topics

hello, I have a problem with my AN-X2-AB-DHRIO Prosoft module, I can't connect with the module because I lost a microSD card that has firmware and...
Replies
12
Views
344
We have a remove PLC rack that is being used to collect data from older equipment via a 1756-DHRIO module. This module occasionally faults out...
Replies
1
Views
391
Does anyone have information or documentation regarding the protocol used in Rockwell's Remote IO, and how the physical layer of the network...
Replies
5
Views
877
I have never understood how the I/O is configured using RIO. In the tree there is only the RIO module, not the racks of I/O attached or all the...
Replies
2
Views
1,273
HI All, I would like to know your opinion about the disposition over the 1734 and 1718 rack for the I/O Cards. - Normally I use for the first...
Replies
1
Views
460
Back
Top Bottom