access path of pc access!!

subnet

Member
S
Join Date
Jun 2006
Location
seoul
Posts
3
I am tring to run WinCC with PC access but it would not work!!
I think i have written wrong access path to address PC access item.

What is access path to address PC access item?

is it "MicroWin.plc_1"??

please help!!
 
Last edited:
I have found it my self!! does not need to put access path!!
just add item with OPC item manager!!
it worked!!
 

Similar Topics

A
I/O access error on S7-300
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
130
JesperMP
JesperMP
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
73
mk42
M
BobB
Remote access and control
I have to provide remote access and control to a touch screen. I was thinking about using Weintek and the Weincloud. Does anyone know if this is...
Replies
11
Views
592
atc222
A
A
Proficy Module Parameter Programmatic Access
Greetings, I am working on a project and I would like to scale %AI to -10.0 to 10.0 VDC. The module Input data is stored as a 16 bit Integer and...
Replies
4
Views
66
NetNathan
N
U
What ports / protocol do I need to open to remotely access a TIA Portal 1500 PLC?
Hi all Trying to remotely connect to a TIA Portal PLC. I can ping it without a problem but can't get my software to connect. I've opened port...
Replies
8
Views
322
uptown47
U
Back
Top Bottom