OCME Albatross system Upgrade to Siemens

Johnny T

Member
Johnny T
Join Date
Jul 2003
Location
Fife, Scotland
Posts
642
Hi

I need to upgrade an old OCME Albatross SCADA system to Siemens (or Mitsubishi). I can design the screens etc to mimic the old system but how do you go about finding out what 'tags' etc are being used in the old system.

I haven't got any software that will talk to the old Albatross system. I need to design its replacement alongside the existing system and then do the swap over at a weekend so a 'trial and error' method isn't really viable.

Has anyone any ideas on how to approach this?

Thanks for any light you can shed on it..

JT :unsure:
 

Similar Topics

I
Set points on a triplex system
Hello, I have no training in maintaining potable water systems, so forgive me if some of my terminology is far off the mark or if I'm focusing on...
Replies
0
Views
77
indykins
I
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
91
robertmee
R
D
Hardware Configuration Changes to Live Siemens System
Hi all, This is going to be a long post apologies. I'm also a complete beginner to the world of PLCs. I'm currently working on my first ever...
Replies
10
Views
434
mk42
M
P
Using a Dedicated Controller for Improved Resolution in a Nozzle Array System?
Hello everyone, I'm working on a project that involves controlling an array of nozzles within a CNC environment, where the nozzles travel along a...
Replies
5
Views
176
piter
P
P
Simatic Wincc 7.5 SCADA system
I am utilizing both HMI and SCADA for my project. Both HMI and SCADA have identical tags. When I modify the tag value on HMI, it is reflected in...
Replies
2
Views
138
Parthiban balasubramnian
P
Back
Top Bottom