Hi all,
This is my first post here.
I'm a student just started to learn how to use Omron CJ1M. We
intend to use the instruction "PLS2" to generate pulse
to control a stepper motor. scratch: not sure if PLS2 is
suitable bcos the PLC will be connected to a stepper
motor driver)
The problem is, the programming manual for CJ1M seems
limited. I dont know what the PLS2 the parameters "S","M","F" stands for...can anyone explain it to me?
Any example/tutorial of using PLS2 or suitable
instructions is much appreciated!
Thanks!
This is my first post here.
I'm a student just started to learn how to use Omron CJ1M. We
intend to use the instruction "PLS2" to generate pulse
to control a stepper motor. scratch: not sure if PLS2 is
suitable bcos the PLC will be connected to a stepper
motor driver)
The problem is, the programming manual for CJ1M seems
limited. I dont know what the PLS2 the parameters "S","M","F" stands for...can anyone explain it to me?
Any example/tutorial of using PLS2 or suitable
instructions is much appreciated!
Thanks!