ktmtragic Member K Join Date Jan 2013 Location Sydney Posts 92 Aug 19, 2019 #1 Can anyone help with software for a B&R Compact legacy PLC part # SWPLCBRC01-0 Thanks
stoyanb Member S Join Date Oct 2019 Location Sofia Posts 3 Oct 11, 2019 #2 Hi there, Did you manage to find this software for BRCOMP1-0 ? I desperately need it Thanks Regards
sigmadelta Member S Join Date Apr 2016 Location From Canada - Living in Bulgaria Posts 2,010 Oct 11, 2019 #3 I found on some other searching that this software is called PROSYS. Here is a link, but I have no idea about the software. https://cdn-06.anonfile.com/Ydb3AfWame/fef2a8b2-1570817283/PROSYS.zip
I found on some other searching that this software is called PROSYS. Here is a link, but I have no idea about the software. https://cdn-06.anonfile.com/Ydb3AfWame/fef2a8b2-1570817283/PROSYS.zip
stoyanb Member S Join Date Oct 2019 Location Sofia Posts 3 Oct 12, 2019 #4 Thank you very much mate, I'll run the software Monday and I'll let know. Best Regards Stoyan
fridgeydidge Member F Join Date Sep 2021 Location Melbourne Posts 1 Sep 1, 2021 #5 Hello, did this software work? Am currently stuck with a fault I need solved within this PLC
stoyanb Member S Join Date Oct 2019 Location Sofia Posts 3 Sep 1, 2021 #6 Hi, the software run under DOS only. I didn't manage to connect the PLC to the software. I repaired the PLC but the test has been made by customer at the site. Good luck
Hi, the software run under DOS only. I didn't manage to connect the PLC to the software. I repaired the PLC but the test has been made by customer at the site. Good luck