Hello
I have been looking for answers to the next question on the Rockwell Automation site unsuccessfully:
If I have a ControlNet interface module attached to a ControlLogix controller, and I want to add several ControlNet-Flex I/O modules (Over redundant ControlNet)... how many 1794-ACNR15 (ControlNet adapter modules for Flex I/O) can I connect to the ControlLogix controller in one single segment?
I hope it is clear enough... otherwise I can write it this way: "How many 1794-ACNR15 can I connect to a single ControlNet adapter in a ControlLogix chassiss?"
|-----------------|
| | | |
| | | | ControlLogix
| | | |
|-----------------|
| |
| | redundant ControlNet
| |
°°°°
| | 1794 ACNR15 Module for Flex I/O +
°°°°
| |
| | redundant ControlNet
| |
°°°°
| | 1794 ACNR15 Modules for Flex I/O (how many more) ?
°°°°
THANKS !!!
I have been looking for answers to the next question on the Rockwell Automation site unsuccessfully:
If I have a ControlNet interface module attached to a ControlLogix controller, and I want to add several ControlNet-Flex I/O modules (Over redundant ControlNet)... how many 1794-ACNR15 (ControlNet adapter modules for Flex I/O) can I connect to the ControlLogix controller in one single segment?
I hope it is clear enough... otherwise I can write it this way: "How many 1794-ACNR15 can I connect to a single ControlNet adapter in a ControlLogix chassiss?"
|-----------------|
| | | |
| | | | ControlLogix
| | | |
|-----------------|
| |
| | redundant ControlNet
| |
°°°°
| | 1794 ACNR15 Module for Flex I/O +
°°°°
| |
| | redundant ControlNet
| |
°°°°
| | 1794 ACNR15 Modules for Flex I/O (how many more) ?
°°°°
THANKS !!!