selectionplc
Member
I have a 1769-HSC card connected to a CompactLogix and using RSLogix 5000. I have device simulating a pulse to the card. InputStateA0 is showing up as 0 then 1, then 0. The problem is that no current counts or stored counts show up.
This is my first time configuring one of these HSC cards. I've attached screenshots of my config. I've tried changing a bunch of configuration settings, but am not getting any different results.
I appreciate any suggests. Thanks.
This is my first time configuring one of these HSC cards. I've attached screenshots of my config. I've tried changing a bunch of configuration settings, but am not getting any different results.
I appreciate any suggests. Thanks.