SLC5/05 IO TimeOut Reading

Thanks all for the input. We ended up replacing the back plane and in the process found a scorched resistor on the power supply, so replaced it as well. Not sure which or if both were an issue, but we have had no problems since out of the setup.
 

Similar Topics

J
Interact PS10 HMI SLC5 Driver 8H Error Request Timeout [2]
Not Sure What I Have Missed Or Need To Check Next, SLC5 Driver Request Timming Out On Node-2 [HMI] Listed Below Are The Findings/Results...
Replies
4
Views
8,296
JLDrescher
J
M
SLC5/03: (problem) Serial Communication RS232 to RS232 using Laptop DB9
I have wasted a week trying to figure out how to connect an SLC5/03 with my laptop. I do not have and can not Buy the 1747 UIC and PC3 cables. I...
Replies
14
Views
2,551
dmroeder
dmroeder
M
Beginner problem AB SLC5/03
I am trying to connect to SLC5/03 using an FTDI usb to rs232 with female to female converter at 1 end... however I can not connect to it ... the...
Replies
8
Views
1,269
Muhammad Abdullah
M
H
SLC5/03 to Panelview Plus 7 Standard
Good evening. I am in serious need of help. I am trying to connect a Panelview Plus 7 Standard to a SLC5/03(1741-L531) using a Moxa MGate...
Replies
3
Views
634
haldunkle
H
M
PLX51-net-eni comms between slc5/04 and panel view plus 7
Hi. I am having trouble establishing comms between an slc5/04 and panel view plus 7 via a PLX51-net-eni. The set up is: 5/04 Channel 0 DF1...
Replies
8
Views
921
Mikemator
M
Back
Top Bottom