Help /info Email data from plc

stu

Member
Join Date
Aug 2005
Location
England
Posts
772
Hi guys
I have had a thought that I could email data from a plc , but I have never done this and need your help ?
I have a micrologix 1400 and a **** 4g unit on the same network.
Is it possible to email a data table or a list of Values ones a week?
I would like to understand the code instructions so I can put it into practice??
Has anyone done this before or could help with the info thanks stu
 

Similar Topics

All, I have an older machine which uses Bosch Rexroth proportional control for pump tilt and relief. The pump would not tilt. We tested command...
Replies
0
Views
1,088
Hi guys I hope you all had a great Christmas, I have a 2711p-RDT12c pvp 1250 which I would like to have a engineering page with Hmi info with...
Replies
0
Views
1,595
Hi guys I need some advice , I have a mixer using rs500 and a hmi and a silo delivery system with rs500 with a pvp ? The plc are connected via...
Replies
4
Views
1,998
Hi guys I was wondering if it is possible to split a pt100 probe signal , I have a pt100 going to a controller but I would like to piggy back off...
Replies
10
Views
8,658
Hi guys The other day I saw a youtube video on factorytalk viewpoint mobile and I thought this would help our engineers on dianostic on the...
Replies
2
Views
2,749
Back
Top Bottom