pdf114 Member P Join Date Sep 2005 Location York PA Posts 1 Sep 22, 2005 #1 I have just taken over maintenance of some equipment that has an Omron Sysmac C20 PLC. I have purchased Omron SysWin and have not yet received it. I am wondering what type of cabling will be required? Is it a null modem?
I have just taken over maintenance of some equipment that has an Omron Sysmac C20 PLC. I have purchased Omron SysWin and have not yet received it. I am wondering what type of cabling will be required? Is it a null modem?
jrwb4gbm Lifetime Supporting Member J Join Date Apr 2002 Location NC Posts 2,245 Sep 22, 2005 #2 I don't know much about omron, try the search button up at the top of the screen. Also, mrplc.com also has a lot of omron info.
I don't know much about omron, try the search button up at the top of the screen. Also, mrplc.com also has a lot of omron info.
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,558 Sep 23, 2005 #3 You will require a 3G2C7-LK201EV1. Try E-bay as they are really expensive and the C20 has basically been dead for years. For Omron cables try here http://forum.mrplc.com/index.php?act=Downloads&CODE=02&id=74 By the way, this should be in the live Q&A section and not the practice posting section of the board.
You will require a 3G2C7-LK201EV1. Try E-bay as they are really expensive and the C20 has basically been dead for years. For Omron cables try here http://forum.mrplc.com/index.php?act=Downloads&CODE=02&id=74 By the way, this should be in the live Q&A section and not the practice posting section of the board.