hello all, I have a slc5/04 that i need to download the logic from. I am trying to figure out what I need to communicate with this bad boy. it has a panelview 1000 connected to the rs232 port. I tried disconnecting the panelview and doing a autconfig with the rs232 driver using a regular cp3 cable and it did not work. I know that you need this cable:
http://www.rockwellautomation.com/support/pccards/get/1784-PCMK_IM.pdf
to use the dh programming port but I was wondering f there was any way around buying the expensive cable?
http://www.rockwellautomation.com/support/pccards/get/1784-PCMK_IM.pdf
to use the dh programming port but I was wondering f there was any way around buying the expensive cable?