FactoryTalk View Studio problems

RHP

Member
Join Date
Nov 2020
Location
USA
Posts
1
Hello, I am having issues in factory talk view studio. I am trying to point studio at the PLC I am working with, but when I click on factorytalk linx -> communication setup, I am prompted with this screen, followed by the following 2 dialogue boxes. I have no problem in linx classic seeing my plc or panelview.

I have tried reinstalling several times, aside from that I am not sure which direction to go. I would greatly appreciate if anyone could point me towards success. Thanks in advance for your time.

-RHP

error_for_plcnet.pngerror_for_plcnet2.pngerror_for_plcnet3.png
 
first, can u ping the plc?
second, can u see plc in the rslinx?

never mind, since you stated " I have no problem in linx classic seeing my plc or panelview."
 
Last edited:

Similar Topics

Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
76
Hi all, I'm having an issue with connecting View Studio emulation to a real PLC. I am running View Studio 8.01 on a Hyper-V virtual machine...
Replies
0
Views
233
Hello. I have a Project I'm doing in Factorytalk View Studio. One of my displays I created has a bunch of red x's on all of the objects I created...
Replies
5
Views
511
So, I'm new to the PLC world (fresh graduate) and at my job I've been pretty much only helping out the other programmers with simpler tasks while...
Replies
1
Views
584
Good morning, I have a project coming up that will require my HMI runtime to toggle from English to Spanish via selector switch. What is the...
Replies
0
Views
433
Back
Top Bottom