How to connect AC sensor and motor to PLC

Zhen

Member
Join Date
Apr 2009
Location
New york
Posts
3
Hi,

I am new to PLC's and I want to connect a 3 wire AC sensor (with "input", "neutral", and "output") and a 3 wire AC motor (with "line", "CCW", "CW") to my PLC, but I don't know how.

my sensor is an Allen-Bradley Photoswitch

my motor is this: http://catalog.orientalmotor.com/it...u?&seo=110&bc=100|1055|1057|3001024|0|3001025

my PLC is this: http://web3.automationdirect.com/ad...s_(Stackable_Micro_Brick)/PLC_Units/C0-00AR-D

the power supply for my PLC is this: http://web3.automationdirect.com/ad...Stackable_Micro_Brick)/Power_Supplies/C0-01AC

I want to use the sensor to control the on/off state and rotation directions of the motor.

I am hoping to power both the sensor and motor using the PLC, but I have no idea how to wire them.

Please help. Thanks.
 
I want to use the sensor to control the on/off state and rotation directions of the motor.

I am hoping to power both the sensor and motor using the PLC, but I have no idea how to wire them.

Please help. Thanks.

No details on the photo eye can't help until we get them

Opps I forgot to show a fuse !


OZEE, 6 watts 120V

clickorintal.jpg
 
No details on the photo eye can't help until we get them

Opps I forgot to show a fuse !


OZEE, 6 watts 120V

Thank you for your diagram.

The catalog for the sensor is this: http://www.ab.com/catalogs/c114/1pho/1159172.pdf

The sensor is an AC/DC wide angle diffuse photoswitch
(42SRP - 6014) with:

Input: Black: 20-132V AC (DC-) 1.2VA
Neutral: White: (DC+)
Output: Orange: 300mA @ 132V AC/DC Max

Thank you, diagrams help greatly!
 
Zhen,

This should work.
howtocon.jpg

To others,

The motor is.

spacer.gif
Output Power HP (W) 1/125 HP (6W)

spacer.gif

spacer.gif
Voltage (VAC) Single-Phase 110/115 VAC

spacer.gif

spacer.gif
Frequency (Hz) 60

spacer.gif
 

Similar Topics

Hi, I am working on a project with Delta PLC for the first time. I want to connect a Sinking analog sensor (4-20 mA) to a Delta analog module...
Replies
0
Views
1,641
Hey guys, I am building a small prototype for a Coolant Dispensing System and need to measure the flow rate of water & chemical in the pipe in...
Replies
14
Views
3,531
Hello everybody, I work in the field of industrial computing and sensors. However, I am not an automation specialist. My expertise is more on the...
Replies
6
Views
2,082
For example I have pressure sensor 0-6Bar (4-20mA). I have PLC that have to relay pump based on pressure and I also have digital indicator that...
Replies
8
Views
2,179
Hey Friends please suggest me which motion sensor is better for PLC Input. When any body move in the region of motion sensor then sensor give the...
Replies
4
Views
3,393
Back
Top Bottom