Good Evening ,
Attached is a network drawing of a CompactLogix PLC with a CPU and a ENBT bridge module. It seems kind of unusual to me . We, as the customer will provide 2 IP Addresses to the ENBT , that will be totally different from the overall machine. The machine manufacture will use a block of about 16 IP Addresses from a Network Card , in the CPU . These IP Addresses from the Network Card will then communicate with the machines Kinetix Servo Drives , PowerFlex 525's , Flex I/O , etc. What possible Network Card would be in the CPU ?
We want to give the OEM an entrance into the machine remotely. Not sure this is the reason or not. I need to research the prints a little more. I was just briefed on this portion late this week.
Thanks so much for your help.
Attached is a network drawing of a CompactLogix PLC with a CPU and a ENBT bridge module. It seems kind of unusual to me . We, as the customer will provide 2 IP Addresses to the ENBT , that will be totally different from the overall machine. The machine manufacture will use a block of about 16 IP Addresses from a Network Card , in the CPU . These IP Addresses from the Network Card will then communicate with the machines Kinetix Servo Drives , PowerFlex 525's , Flex I/O , etc. What possible Network Card would be in the CPU ?
We want to give the OEM an entrance into the machine remotely. Not sure this is the reason or not. I need to research the prints a little more. I was just briefed on this portion late this week.
Thanks so much for your help.