Mark Buskell
Member
I have been programming with Allen-Bradley processors a number of years now. I will soon have a job which I must use a GE processor (CPU001, MDD845).
My question is how much learning curve should I expect or is it basically a ladder diagram is a ladder diagram.
The GE will have some analog inputs and outputs for controlling water temperature, a counter module for flow totals and some digital inputs and outputs for valves.
It's a fairly simple program that I could almost do with my eyes closed using RSLogix.
Anyone went through this learning curve before?
My question is how much learning curve should I expect or is it basically a ladder diagram is a ladder diagram.
The GE will have some analog inputs and outputs for controlling water temperature, a counter module for flow totals and some digital inputs and outputs for valves.
It's a fairly simple program that I could almost do with my eyes closed using RSLogix.
Anyone went through this learning curve before?