ABneddHelp123
Member
Hi guys
I need some help setting up a pathe in a msg block for the L43 to a micrologix 1100
I have done this between a L32 and Micro with no problems (path: LocalEND,2,100.100.100.30) but I cant seem to come right with the L43
I got 2 Ethernet modules in the L43 both with diffrent addresses. My L43 will be reading from the first unit installed, slot 1 with IP 100.100.100.50 and the micro I use the onboard port IP 100.100.100.30
Is there anyone that can help me with this, I don't have that much experiance with MSG blocks.
I need some help setting up a pathe in a msg block for the L43 to a micrologix 1100
I have done this between a L32 and Micro with no problems (path: LocalEND,2,100.100.100.30) but I cant seem to come right with the L43
I got 2 Ethernet modules in the L43 both with diffrent addresses. My L43 will be reading from the first unit installed, slot 1 with IP 100.100.100.50 and the micro I use the onboard port IP 100.100.100.30
Is there anyone that can help me with this, I don't have that much experiance with MSG blocks.