Lxm32 pto

[email protected]

Member
T
Join Date
Apr 2015
Location
greece
Posts
19
Hello to everyone i have made i programm with plc( M221 and servo LXM32M) the communication is with PTO.I want to ask if i can take the variables of the block i have made and insert to the VIJEO DESIGNER i want to move a conveyor.I want to change the parameters from the screen.
 

Similar Topics

T
Lxm32 pto
Hello to everyone i want to work with lxm32(servo) and m221(plc) communicate with pto and i have problemm with (home block) when i do homing the...
Replies
0
Views
1,360
[email protected]
T
T
Pto lxm32
Hello I want to ask a question what we mean connection with PTO(LXM32 SERVO MOTOR).I dont know what is the PTO.
Replies
3
Views
2,533
[email protected]
T
T
Lxm32
Hello i want to communicate with servo lxm32 and the plc m221 and i dont know the correct control word to enable the drive.
Replies
1
Views
1,606
gclshortt
gclshortt
T
Servo lxm32 connect with m221 with modbus
Hello to everyone i have the servo drive LXM32M and i want to connect with the plc Modicon M221 with Modbus Rtu.
Replies
0
Views
1,611
[email protected]
T
A
PTO VS Analog drives
am planning to build a small machine which have 2 Axis (linear motion and rotary motion) am confused about using closed loop stepper motors (PTO...
Replies
0
Views
1,014
adam_lhadi
A
Back
Top Bottom