nightline
Member
Gents,
The following problem:
I measure a stable 615 VDC on the IAM, but all drives shows a voltage between about 250 VDC and 350 VDC in RSLogix at "drivename".DCvoltage.
Can anyone point me to the cause or sollution of this problem?
Thanks in advance!
The following problem:
I measure a stable 615 VDC on the IAM, but all drives shows a voltage between about 250 VDC and 350 VDC in RSLogix at "drivename".DCvoltage.
Can anyone point me to the cause or sollution of this problem?
Thanks in advance!