Control Enginner Job Offer Vancouver, BC, Canada area

Petr_Broza

Member
P
Join Date
May 2015
Location
Vancouver
Posts
41
Hello,

our HR is looking for new colleague for control engineer position. Few years of experience with AB PLC/HMI, Siemens HMI, Servo drives, drawings etc. would be great. Let me know if you are interested/know someone who would be interested
 

Similar Topics

K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
51
kdean94
K
D
TECHNICAL CHALLENGES WITH FIXING THE PLC RELATED PROBLEM IN A NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL
Hello, I am a plc engineer and I have a job to do in the NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL. A problem where the panel is not...
Replies
1
Views
124
JesperMP
JesperMP
W
Brake Control Kinetix 5500
Hi all, I am upgrading a couple of 2094-BC01-M01 servos with 2198-H015-ERS. The original code uses MSG instructions to control (release, engage...
Replies
2
Views
90
DarrylR
D
H
PID Control Pipeline Pump
Hey there guys, I'm relatively new to PLC programming. I had a few basic classes in college but since then I have mainly been on the instrument...
Replies
3
Views
238
HunterNelson(newby)
H
R
Schneider Control Expert Multiple Monitors
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
92
dalporto
dalporto
Back
Top Bottom