controlconcepts
Lifetime Supporting Member
OP
Great leadMicky
I have now tried.
Fresh .RSP with only new files.
Test AS per Micky's link
1771-IFF A
Fast Analog Input, 16 single-ended or 8 differential channels
1771-IFF B
Fast Millivolt Input, 8 differential channels
#
Input voltage range specification changed from 0 to 35mV to 0 to 50mV
Changed write length from 20 21 to
8,9 ,10, - 12
then lost track will test again after I get some time
Result
Got really excited
stayed for ever in the enabled state and looked at the control word to see if DN ever happened.
added a counter to done bit to see if it was just my remote connection that's when I realized that it was close but no good result
Test
[As the manual states off the top of my head]
send a block write with a length of 0
Result
Error
Next to try
Wipe the processor / use different processor
add a HMI so i can watch what happens in more real time over a camera system.
add traps and counters to log all of my testing results
Thanks again Micky
Matt
I have now tried.
Fresh .RSP with only new files.
Test AS per Micky's link
1771-IFF A
Fast Analog Input, 16 single-ended or 8 differential channels
1771-IFF B
Fast Millivolt Input, 8 differential channels
#
Input voltage range specification changed from 0 to 35mV to 0 to 50mV
Changed write length from 20 21 to
8,9 ,10, - 12
then lost track will test again after I get some time
Result
Got really excited
stayed for ever in the enabled state and looked at the control word to see if DN ever happened.
added a counter to done bit to see if it was just my remote connection that's when I realized that it was close but no good result
Test
[As the manual states off the top of my head]
send a block write with a length of 0
Result
Error
Next to try
Wipe the processor / use different processor
add a HMI so i can watch what happens in more real time over a camera system.
add traps and counters to log all of my testing results
Thanks again Micky
Matt